GTM-MQ7H6CC

SAFETY DATA SHEET

 Effective Date 14-Jan-2022 Version 4

 

  1. IDENTIFICATION

Product Identifier

Product Name                                 ProSoft LIQUID

Other means of identification

SDS#                                                  002

Product Code                                   2ps

Recommended use of the chemical and restrictions on use

Recommended Use Fabrication of denture relines

Details of the supplier of the safety data sheet

Supplier :

Perma Laboratories

2525 E. Royalton Rd. Unit 470546

Broadview Heights, OH  44147

USA

Emergency telephone number

Company Phone Number +1 800-988-9194

  1. HAZARDS IDENTIFICATION

Classification of the substance or mixture

Flammable liquids                        Category 2

Skin Sensitization                         Category 1

Eye Irritation                                 Category 2

Signal word                                    Danger

 

Hazard statements

H225 Highly flammable liquid and vapor

H317 May cause an allergic skin reaction.

H319 Causes eye irritation

    

Physical State Liquid Appearance Colorless Odor Mint, alcohol-like

Precautionary Statements – Prevention

P210 Keep away from heat/sparks/open flames/hot surfaces. – No Smoking.

P240 Ground/bond container and receiving equipment.

P241 Use explosion-proof equipment.

P242 Use only non-sparking tools.

P243 Take precautionary measures against static discharge.

P261 Avoid breathing mist or vapor

P264 Wash thoroughly after handling.

P271 Use only outdoors or in a well-ventilated area.

P272 Contaminated work clothing should not be allowed out of the workplace.

P280 Wear protective gloves/eye protection/face protection.

Precautionary Statements – Response

P302+P352 IF ON SKIN: Wash with plenty of water.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.

P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P312 Call a POISON CENTER or doctor/physician if you feel unwell.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P337+P313 If eye irritation persists: Get medical advice/attention.

P362+P364 Take off contaminated clothing and wash it before use.

P370+P378 In case of fire: Use water spray, foam, dry powder, or CO2 for extinction.

 

Precautionary Statements – Disposal

P501 Dispose of contents/container to an approved waste disposal plant.

Hazardous component(s) for labeling

Contains ethyl alcohol

  1. COMPOSITION / INFORMATION ON INGREDIENTS

Chemical Name CAS No Weight - % Trade Secret

Citric Plasticizer Proprietary < 85 *

Ethyl alcohol 64-17-5 < 25 *

*Specific CAS No and chemical weight have been withheld as a trade secret.

  1. FIRST AID MEASURES

First aid measures

Inhalation Remove victim to fresh air. Keep at rest in a position comfortable for breathing. Seek immediate medical attention.

Eye contact Rinse immediately with plenty of water, including under the eyelids, for at least 15 minutes. If irritation persists, call a physician immediately.

Ingestion If ingested, do not induce vomiting. Drink plenty of water immediately. If vomiting, continue to offer water.

Never give anything by mouth to an unconscious person. Call a physician or poison control center immediately and provide an estimate of when and how much material was ingested. Seek immediate medical attention.

Skin Contact Wash with soap and water. If irritation, redness or swelling persists, call a physician immediately. Take off contaminated clothing and wash before reuse.

Most important symptoms and effects, both acute and delayed Symptoms -  No information available.

Indication of any immediate medical attention and special treatment needed

Note to physicians Treat symptomatically.

  1. FIRE-FIGHTING MEASURES

Extinguishing Media

Suitable: Dry chemical, carbon dioxide (CO2), water spray (fog), alcohol resistant foam

Unsuitable: Do not use water jet (frothing possible)

Specific hazards arising from the chemical

Highly flammable liquid and vapor. Vapors may travel to source of ignition and flash back.

Special Fire Fighting Procedures

Wear self-contained breathing apparatus for firefighting if necessary. Do not enter area without proper protection. Fight fire from safe distance/protected location. Use water spray to cool unopened containers. Use with caution. Water runoff can cause environmental damage.

Dike and collect water used to fight fire.

Small fires: Dry chemical, carbon dioxide, water spray or alcohol-resistant foam.

Large fires: Water spray, water fog and alcohol-resistant foam.

  1. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Personal precautions Before cleaning any spill or leak, individuals must wear personal protective equipment as required.

Remove any contaminated clothing and wash thoroughly before reuse.

Environmental precautions ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Prevent product from entering drains. Spillages or uncontrolled discharges into watercourses must be alerted to the appropriate regulatory body.

Methods and material for containment and clean-up

Method for containment Prevent further leakage or spillage if safe to do so. Dike and contain spill with inert material. Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. DO NOT use combustible materials such as sawdust. May contaminate water supply.

Method for clean-up Maximize ventilation (open doors and windows) and secure all sources of ignition. Place into appropriate closed container(s) for disposal in accordance with local, state and federal regulations.

Wash all affected areas with plenty of warm water and soap.

  1. HANDLING AND STORAGE

Precautions for safe handling

Advice on safe handling Use only in well ventilated area. Avoid breathing vapor, fumes or mist. Avoid contact with skin, eyes and clothing. Use good personal hygiene and housekeeping. After use, wash hands and exposed skin with soap and water. Do not eat, drink, or smoke while handling product. Ground and bond all containers when transferring. Observe precautions found on the label.

Conditions for safe storage, including any incompatibilities

Storage Conditions Keep away from heat, sparks, flame and other sources of ignition. Protect from direct sunlight.

Store containers in a cool, well-ventilated place. Keep container closed after each use.

Packaging Materials Keep in original container.

  1. EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure guidelines Consideration should be given to the work procedures involved and the potential extent of exposure as they may determine whether a higher level of protection is required. The following information is given as general guidance.

Chemical Name ACGIH TLV OSHA PEL:

Ethyl alcohol

64-17-5

STEL: 1000 ppm TWA: 1000 ppm

ACGIH = American Conference of Governmental Industrial Hygienists / OSHA = Occupational Safety and Health Administration

PEL = Permissible Exposure Levels / STEL – Short Term Exposure Limit / TLV – Threshold Limit Value / TWA = Time Weighted Average

Individual protection measures, such as personal protective equipment

Eye / face protection Depending on the use of this product, safety glasses or goggles may be worn. If necessary, refer to

US OSHA 29CFR SS1910.133, Canadian standards or the European Standard EN 166. Ensure that an eyewash station, sink or washbasin is available in case of exposure to eyes.

Skin and body protection If anticipated that prolonged and repeated skin contact will occur during use of this product, wear gloves for routine industrial use. If necessary, refer to US OSHA 29CFR SS1910.138 or the appropriate standards of Canada or the EC member states. Wear suitable protective clothing.

Respiratory protection No special respiratory protection is required under typical circumstances of use or handling. If necessary, use only respiratory protection authorized per US OSHA requirement in 29 CFR SS

1910.134, or applicable US state regulations, or the appropriate standards of Canada, its provinces, or the EC member states. VENTILATION: Local exhaust at processing equipment.

General hygiene considerations Handle in accordance with good industrial hygiene and safety practice. Wash thoroughly after handling. Food, beverages and tobacco products should not be carried, stored, or consumed where this material is in use. Wash hands thoroughly before eating, drinking, or smoking.

 

  1. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties

Physical state Liquid Odor Mint, alcohol-like

Appearance Colorless Odor threshold Not determined

Color Clear

Property Values Remarks / Method

pH Not determined

Boiling point / boiling range 78.4°- 100°C /

173-212°F

Flash point 19.4°C / 67°F

Evaporation rate Not determined

Flammability (solid, gas) n/a (liquid)

Flammability limits in air

 Upper flammability limit Not established

 Lower flammability limit Not established

Specific gravity 0.996

Solubility in other solvents Not determined

Autoignition temperature Not established

Other information

Density 0.996

  1. STABILITY AND REACTIVITY

Chemical stability Stable under recommended storage conditions.

Conditions to avoid Avoid impact, friction, heat, sparks, flame and source of ignition.

Incompatible materials Prevent contact with combustible materials, inorganic acids and strong oxidizing agents.

Hazardous decomposition products Carbon oxides

  1. TOXICOLOGICAL INFORMATION

Information on likely routes of exposures - Product information

Inhalation Harmful if inhaled

Eye contact Causes severe eye irritation.

Skin contact Causes skin irritation. May be harmful in contact with skin.

Ingestion May be harmful if swallowed.

Product Components Listed as Carcinogenic No information

Component information

Chemical Name ORAL LD50 DERMAL LD50 INHALATION LC50

Ethyl Alcohol

64-17-5

>5000 mg/kg >5000 mg/kg >20 mg/L

  1. ECOLOGICAL INFORMATION

Ecotoxicity No information

  1. DISPOSAL CONSIDERATIONS

Waste treatment methods

Disposal of wastes Follow all local and national government regulations in disposing material or contaminated packaging.

Contaminated Packaging Reuse of empty containers is not recommended. Employees should be advised of the potential hazards due

to residual material associated with empty containers. Dispose of all empty containers in accordance with

local and national government regulations.

  1. TRANSPORTATION INFORMATION

DOT

UN / ID No UN1993

Proper shipping name Flammable liquid, n.o.s. (Ethyl alcohol / plasticizer solution)

Hazard Class 3

Packing Group II

IATA

UN / ID No UN1993

Proper shipping name Flammable liquid, n.o.s. (Ethyl alcohol / plasticizer solution)

Hazard Class 3

Packing Group II

IMDG

UN / ID No UN1993

Proper shipping name Flammable liquid, n.o.s. (Ethyl alcohol / plasticizer solution)

Hazard Class 3

Packing Group II

  1. REGULATORY INFORMATION

International Inventories

Ethyl alcohol 64-17-5

TSCA United States Toxic Substances Control Act 8(b) Inventory - None

DSL Canadian Domestic Substances List - None

EINECS Listed European Inventory of Existing Chemical Substances

EU Regulations EC No. 1272/2008 (CLP) Classification, Labeling, Packaging

Medical Devices Directive 93/42/EEC - Class II Medical Devices (OTC)

US Federal Regulations SARA 302 – Extremely hazardous substance - Not listed

SARA 311/312 – Hazard categories – Listed

SARA 313 – Not listed

US State Regulations California Proposition 65 – Warning. This product contains the following chemicals which are listed by the State of California as carcinogenic or a reproductive toxin: None

  1. OTHER INFORMATION

HMIS

Health Hazards 2, Flammability 3,  Physical Hazards 0

Effective Date 14-Jan-2022

Disclaimer

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication.

The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release. It is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.

End of Safety Data Sheet